Montigo IOSK6 Bedienungsanleitung PDF herunterladen

Follow the instructions for the unit installation in the up to Step 1 on

Page 7 of the installation guide.

The unit is in place with the screws removed as illustrated there.

STEP 1: Back frame the unit with the metal header supplied by Montigo

above the unit and either combustible or non-combustible framing to the

sides and bottom maintaining clearances as shown and ensuring the

gallvanized apron (Fig 1, Part No. 620-482) can be attached to the framing.

Figure 1: Indoor/ Outdoor Sealing Kit Ccmponents

Figure 2: Backframe unit

CLEARANCE TO COMBUSTIBLES:

6" Top, 3" each side, 3" bottom from the protruding window box.

Figure 3: Attach galvanized apron to unit

STEP 4: Attach the stainless steel frame (Fig. 1, Part No. IOSK6-A01)

to the galvanized frame lining up the holes around perimeter. Secure in

place through holes across the top and down the sides. Do not secure

the bottom ange.

STEP 5: Apply approved waterproong membrane over the ange of

the frame on the top and sides and under the ange of the frame at

the bottom. The membrane should overlap the frame approximately 2"

around the perimeter.

STEP 6: All facing materials may now be installed over the frame.

BE CERTAIN TO MAINTAIN 6" ABOVE AND 3" ON SIDES AND BOTTOM

TO ANY COMBUSTIBLE MATERIAL

STEP 2: Place the galvanized apron and attach to the unit using the 6

screws removed from the unit face, Figure 3.

STEP 7: Mount the framed glass (Fig 1, IOSK6-A02) onto the unit and

secure in place rst with only the two side screws.

STEP 8: Place the Galvanized strips (4 supplied) at each corner lining up

screw holes and secure both the strips and the framed glass to the unit.

STEP 9: Attach the stainless steel trim (Fig1, IOSK6-A03), by placing it

on and ensuring the magnets catch the previously placed galvanized strip.

Figure 4: Install silicone gasket

STEP 3: Install the silicon gasket material (supplied by Montigo) in one

continuous strip with the joint at the bottom, Figure 4.

Indoor / Outdoor Sealing Kit For R620 ST

Use this instruction in conjuction with unit

instruction manual (Doc. XG0773)

Installation Instruction

Kit Part No. IOSK6

85.25

30.12

18.79 21.80

73.92

76.94

2.90

ISOMETRIC VIEW

(NTS)

IOSK6-A03

IOSK6-A02

IOSK6-A01

620-482

ITEM NO.

PART NUMBER

DESCRIPTION

QTY. REV.

620-482

BACK PLATE, IOSK6

IOSK6-A01

OUTER FRAME, IOSK6

IOSK6-A02

DOOR ASSEMBLY, IOSK6

IOSK6-A03

DOOR TRIM ASSEMBLY, IOSK6

NTS

SIZE

DWG. NO.

REV.

SHEET 1 OF 1

WEIGHT:

IOSK6

FINISH

MATERIAL

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

1/32"

TWO PLACE DECIMAL

.015"

THREE PLACE DECIMAL

.005"

ALL BENDS ARE ASSUMED

TO BE 90

UNLESS NOTED

OTHERWISE.

CHECKED BY

DRAWN BY

DATE

NAME

12/2/2010

INDOOR OUTDOOR SEALING KIT FOR R620

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CANADIAN HEATING PRODUCTS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF CANADIAN HEATING PRODUCTS IS PROHIBITED.

PROPRIETARY AND CONFIDENTIAL

Z:\CADD\2007 CADD\Standard\Residential C-Vew\RVIEW IOK\R620IOK\IOSK6

Thursday, December 02, 2010 1:33:16 PM

SCALE

1 2

Inhaltsverzeichnis

Seite 1 - Kit Part No. IOSK6

Follow the instructions for the unit installation in the up to Step 1 on Page 7 of the installation guide.The unit is in place with the screws removed

Seite 2 - 12/2/2010

85.2530.12 18.79 21.8073.9276.942.90ISOMETRIC VIEW(NTS)IOSK6-A03IOSK6-A02IOSK6-A01620-482ITEM NO.PART NUMBERDESCRIPTIONQTY. REV.1620-482BACK PLATE, IO

Kommentare zu diesen Handbüchern

Keine Kommentare

Montigo IOSK6 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Montigo IOSK6 herunter. Montigo IOSK6 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Montigo IOSK6